Comware Based
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot Acces to 4500G

 
Highlighted
Occasional Visitor

Cannot Acces to 4500G

Hi all,

 

i cannot access to 3com 4500G switch , when i scan via thedude from mikrotik, services http, ssh, telnet, ping is down,

is it another way to access my switch?

 

thx all

3 REPLIES 3
Highlighted
Super Advisor

Re: Cannot Acces to 4500G

If you cannot reach your switch through its IP address, the only way to access it is using the local console. Make a double check if there is some firewall rule that blocks the access or some route missing in the environment.

 

Regards.

Regards,
Fred Mancen
Highlighted
Occasional Visitor

Re: Cannot Acces to 4500G

when i try access 4500g with console there is no response from 4500g, usually when i was using console switch will ask user or password to login, and i make sure thats firewall not block port for telnet, ssh, http 

Highlighted
Super Advisor

Re: Cannot Acces to 4500G

 

Did you check the terminal settings? 19200/8N/1/N.

 

If you cannot access the switch in any way, the only method is to reboot the switch already connected to the console and press CTRL+B during boot up, then enter the menu options in order to check if there is some problem with the switch. Maybe the firmware is corrupted, or something like that.

 

Regards.

Regards,
Fred Mancen