HPE Community
Comware Based
1752754 Members
5320 Online
108789 Solutions
New Discussion

Comware 7 firewall udp howto

 
MJaat
Occasional Advisor

‎07-21-2017 12:42 AM

‎07-21-2017 12:42 AM

Comware 7 firewall udp howto

Hi,

 

how can i do same to UDP what "rule 10 permit tcp established" do for TCP?

I mean how i can permit established UDP connections when i have NAT in use?

GE0/0=Internet

GE0/1=192.168.16.0

I need to

- deny udp traffic from internet to GE0/0

- permit traffic fom GE0/1 to internet

- permit traffic from internet to GE0/1 if connection is established, initiated from GE0/1

- multiple protocol's example(IPSEC, IKE, L2TP, DNS, APPE stuff...)

Can i do this with udp-helper?

 

1 person had this problem.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.