HPE Community
Comware Based
1848185 Members
4373 Online
104022 Solutions
New Discussion

Re: DHCP over VPLS?

 
MichaelM55
Trusted Contributor

‎08-22-2012 08:17 AM - edited ‎08-22-2012 08:24 AM

‎08-22-2012 08:17 AM - edited ‎08-22-2012 08:24 AM

DHCP over VPLS?

Hello,

 

shouldn´t DHCP packets also be forwarded over a VPLS connection? (In my case on 5500-HI switches)
- With static IPs, I could easily ping each device behind the VPLS sites.

- With an DHCP server on one site, I do not see any DHCP traffic coming back at the other site. (Of couse that DHCP-Server runs perfectly on my local site...)

 

Limitation, bug, missing configuration option?

 

0 Kudos
2 REPLIES 2
manuel.bitzi
Trusted Contributor

‎08-22-2012 11:35 PM

‎08-22-2012 11:35 PM

Re: DHCP over VPLS?

Hi Michael

 

Some vpls dont allow broadcasts, or deny them. check with your provider. If they are blocked you need a dhcp relay.

 

 

br

Manuel

H3CSE, MASE Network Infrastructure [2011], Switzerland
0 Kudos
MichaelM55
Trusted Contributor

‎08-23-2012 11:27 AM - edited ‎08-23-2012 11:32 AM

‎08-23-2012 11:27 AM - edited ‎08-23-2012 11:32 AM

Re: DHCP over VPLS?

Well, I am the "provider" in this case. I have a really simple setup:

DHCP server on site A == HP 5500-HI 1 == MPLS/VPLS == HP 5500-HI 2 == site B == client

 

As I already mentioned. If I give me a static IP on client of site B and another client on site A within the same subnet I can happily ping each other. But DHCP traffic will not pass the VPLS tunnel.

 

So you think, it´s a limitation of H3C´s VPLS implementation?

 

 

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.