HPE Community
Comware Based
1833757 Members
2720 Online
110063 Solutions
New Discussion

H3C S5800F == HP A5800(?) with Comware 7?

 
MichaelM55
Trusted Contributor

‎06-25-2014 11:54 PM - edited ‎06-26-2014 12:41 AM

‎06-25-2014 11:54 PM - edited ‎06-26-2014 12:41 AM

H3C S5800F == HP A5800(?) with Comware 7?

Well, that H3C S5800F has more RAM. Does anyone know more?

 

Update: Seems to be a completely different switch - yet another switch with Broadcom Trident 1 ASIC: 128K MAC table, PFC, DCBX, FCoE, EVB, TRILL,...

0 Kudos
2 REPLIES 2
sdide
Respected Contributor

‎06-26-2014 01:45 AM

‎06-26-2014 01:45 AM

Re: H3C S5800F == HP A5800(?) with Comware 7?

Hi,

 

not that i can read much of the chinese document you attached, but - seems like the switch referred to in the document, runs R2310, in the comware 7 train. Seems like the HP-equivalent is the HP5900AF switch.

 

All the "normal" H3C 5800 and HP 5800 switches are running comware 5.

 

 

Regards

Søren Dideriksen

Søren Dideriksen, Network Administrator
Region Midtjylland
0 Kudos
MichaelM55
Trusted Contributor

‎06-26-2014 03:03 AM

‎06-26-2014 03:03 AM

Re: H3C S5800F == HP A5800(?) with Comware 7?

Actually HP 5900AF/5900CP == H3C S5820v2

In the forums it was once mentioned that HP 5800 would get a Comware V7 software upgrade. First I thought that this new firmware is that upgrade. But the H3C 5800F has actually nothing to do with the "old" H3C S5800 (== HP A5800)

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.