HPE Community
Comware Based
1832889 Members
2648 Online
110048 Solutions
New Discussion

HP A5800 and Cacti

 
L1nklight
Valued Contributor

‎07-05-2012 06:43 AM

‎07-05-2012 06:43 AM

HP A5800 and Cacti

Anyone interested in trying to get a template together for Cacti to pull statistics for the A series switch set? I am very green to Cacti and mibs, but I've pulled together some OIDs and values that may be of interest. As far as I can tell, most of my statistics per port are pulling an undefined value and I am not sure why. Here is one such example:

 

1.3.6.1.4.1.25506.2.40.2.1.2.1.1.1.1: HH3C-IF-EXT-MIB|hh3c if flow stat: GigabitEthernet1/0/1|hh3c if stat flow interval,Undefined,,(not defined),0

1 person had this problem.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.