Comware Based
1753865 Members
7586 Online
108809 Solutions
New Discussion

info-center cannot configure loghost

 
Richard_2
New Member

info-center cannot configure loghost

Hi All



I am new to 3com switch. My problem is loghost cannnot be configured on 4500 switch even I follow the instruction. Here is the cut out of the command run hope any kind soul out there can give a pointer or hint. Thank you in advance.

Username:admin

Password:

<.........>

%Apr 1 23:56:16:818 2000 ........ SHELL/5/LOGIN:- 1 - admin(aux0) in unit1 lo

gin

<........>



<.........>system-view

System View: return to User View with Ctrl+Z.

info-center enable

% Information center is enabled



info-center loghost channel loghost

^

% Wrong parameter found at '^' position.



info-center ?

channel Set the name of information channel

console Setting of console configuration

enable Enable the information center

logbuffer Setting of log buffer configuration

monitor Setting of monitor configuration

snmp Setting of snmp configuration

source Informational source setting

switch-on Setting of switch-on configuration

timestamp Set the time stamp type of information

trapbuffer Setting of trap buffer configuration



<...........>display channel

channel number:0, channel name:console

MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL



ffff0000 default Y warning Y debugging Y debugging





channel number:1, channel name:monitor

MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL



ffff0000 default Y warning Y debugging Y debugging





channel number:2, channel name:loghost <- loghost exist

MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL



ffff0000 default Y informational Y debugging N debugging



My 3com switch software version.

display version

3Com Corporation

SuperStack 3 Switch 4500 26-Port Software Version 3Com OS V3.01.00s56p01

Copyright(C) 2003-2005 3Com Corporation. All Rights Reserved.

SuperStack 3 Switch 4500 26-Port uptime is 0 week, 0 day, 0 hour, 44 minutes

SuperStack 3 Switch 4500 26-Port with 1 MIPS Processor

64M bytes DRAM

8196K bytes Flash Memory

Config Register points to FLASH



CPLD Version is CPLD 003

Bootrom Version is 1.01

24 FE + 4 GE Hardware Version is 00.00.00

--------------------------------------------------