LACP Notworking

[AP94]

Hello im trying to configre LACP between HP1920 24g PoE+ and Netgear GS724T but LACP is not stable it goes up and down i can’t see the problem in my config i hope someone can point me in the right direction

it’s only the LACP group 2 that I’m having an issue with

i have a LACP Group 1 to a Synology NAS it works perfectly

but the LACP Between HP and Netgear i get this message

 Member port GigabitEthernet1/0/22 of aggregation group BAGG2 becomes INACTIVE because the port's physical state (down) is improper for being attached.

hp Config

#
 domain default enable system
#
 ipv6
#
 telnet server enable
#
 loopback-detection enable
#
 ssl version ssl3.0 disable
#
 password-recovery enable
#
vlan 1
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
user-group system
 group-attribute allow-guest
#
local-user admin
 authorization-attribute level 3
 service-type telnet terminal
 service-type web
#
 stp mode rstp
 stp enable
#
interface Bridge-Aggregation1
 link-aggregation mode dynamic
#
interface Bridge-Aggregation2
 port link-type hybrid
 port hybrid vlan 1 untagged
 link-aggregation mode dynamic
#
interface NULL0
#
interface Vlan-interface1
 ip address 10.1.1.23 255.255.255.0
#
interface GigabitEthernet1/0/1
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 1
#
interface GigabitEthernet1/0/2
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 1
#
interface GigabitEthernet1/0/3
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 1
#
interface GigabitEthernet1/0/4
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 1
#
interface GigabitEthernet1/0/5
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/6
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/7
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/8
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/9
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/10
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/11
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/12
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/13
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/14
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/15
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/16
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/17
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/18
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/19
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/20
 port link-type hybrid
 port hybrid vlan 1 untagged
 loopback-detection enable
 loopback-detection control enable
 loopback-detection per-vlan enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 2
#
interface GigabitEthernet1/0/21
 port link-type hybrid
 port hybrid vlan 1 untagged
 loopback-detection enable
 loopback-detection control enable
 loopback-detection per-vlan enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 2
#
interface GigabitEthernet1/0/22
 port link-type hybrid
 port hybrid vlan 1 untagged
 loopback-detection enable
 loopback-detection control enable
 loopback-detection per-vlan enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 2
#
interface GigabitEthernet1/0/23
 port link-type hybrid
 port hybrid vlan 1 untagged
 loopback-detection enable
 loopback-detection control enable
 loopback-detection per-vlan enable
 port auto-power-down
 poe enable
 stp edged-port enable
 port link-aggregation group 2
#
interface GigabitEthernet1/0/24
 loopback-detection enable
 port auto-power-down
 poe enable
 stp edged-port enable
#
interface GigabitEthernet1/0/25
 loopback-detection enable
 stp edged-port enable
#
interface GigabitEthernet1/0/26
 loopback-detection enable
 stp edged-port enable
#
interface GigabitEthernet1/0/27
 loopback-detection enable
 stp edged-port enable
#
interface GigabitEthernet1/0/28
 loopback-detection enable
 stp edged-port enable
#
 undo info-center logfile enable
#
 ntp-service source-interface Vlan-interface1
 ntp-service unicast-server 10.1.1.22
#
 load xml-configuration
#
user-interface aux 0
 authentication-mode scheme
user-interface vty 0 15
 authentication-mode scheme
#
return

netgear config

spanning-tree

spanning-tree configuration name "08-BD-43-B9-60-FC"

spanning-tree forceversion 802.1w

port-channel linktrap 3/1

interface 0/21

addport 3/1

exit

interface 0/22

addport 3/1

exit

interface 0/23

addport 3/1

exit

interface 0/24

addport 3/1

exit

no voip status

voip oui 00:01:E3 desc SIEMENS

voip oui 00:03:6B desc CISCO1

voip oui 00:12:43 desc CISCO2

voip oui 00:0F:E2 desc H3C

voip oui 00:60:B9 desc NITSUKO

voip oui 00:D0:1E desc PINTEL

voip oui 00:E0:75 desc VERILINK

voip oui 00:E0:BB desc 3COM

voip oui 00:04:0D desc AVAYA1

voip oui 00:1B:4F desc AVAYA2

interface 0/1

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/2

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/3

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/4

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/5

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/6

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/7

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/8

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/9

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/10

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/11

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/12

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/13

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/14

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/15

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/16

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/17

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/18

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/19

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/20

spanning-tree edgeport

spanning-tree port mode

exit

interface 0/21

spanning-tree edgeport

spanning-tree port mode

lacp actor admin key 52

exit

interface 0/22

spanning-tree edgeport

spanning-tree port mode

lacp actor admin key 52

exit

interface 0/23

spanning-tree edgeport

spanning-tree port mode

lacp actor admin key 52

exit

interface 0/24

spanning-tree edgeport

spanning-tree port mode

lacp actor admin key 52

exit

interface 3/1

no port-channel static

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/2

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/3

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/4

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/5

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/6

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/7

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

interface 3/8

no snmp trap link-status

spanning-tree edgeport

lacp collector max-delay 0

exit

exit

[network_king]

Hello,

In order to configure LACP below follow below guidelines & also i have shared a link for 1920 user guide for your reference.

When you configure a link aggregation group, follow these guidelines: • In an aggregation group, a Selected port must have the same port attributes and class-two configurations as the reference port. To keep these configurations consistent, you should configure the port manually. • Choose a reference port from the member ports that are in up state and with the same class-two configurations as the aggregate interface. The candidate ports are sorted in the following order: • Full duplex/high speed. • Full duplex/low speed. • Half duplex/high speed. • Half duplex/low speed. If two ports have the same duplex mode/speed pair, the one with the lower port number is chosen. • Port attribute configuration includes the configuration of the port rate, duplex mode, and link state. For more information about class-two configurations, see "Configuration classes." • To guarantee a successful static aggregation, make sure the ports at the two ends of each link to be aggregated are in the same aggregation state. To guarantee a successful dynamic aggregation, make sure the peer ports of the ports aggregated at one end are also aggregated. The two ends can automatically negotiate the aggregation state of each member port. • Do not assign the following types of ports to Layer 2 aggregate groups: • MAC address authentication-enabled ports.

https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=8498821&docLocale=en_US&docId=emr_na-c04463799&withFrame