MRTG problem @ MSR

[Abdel-Qader]

Hello,

i have HPE MSR routers and when i try to monitor them using MRTG i got the following error:

C:\mrtg-2.17.4\bin>perl cfgmaker snmp_community@x.x.x.x --ifref=ip --i
fdesc=ip --no-down --global "WorkDir: C:\inetpub\MRTG\test" --output testS.cfg
--base: Get Device Info on snmp_community@x.x.x.x:
SNMP Error: no response received
SNMPv1_Session (remote host: "x.x.x.x" [x.x.x.x].161)
                  community: "snmp_community"
                 request ID: 129654656
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at C:/mrtg-2.17.4/bin\..\lib\mrtg2/SNMP_util.pm line 651.
SNMPWALK Problem for 1.3.6.1.2.1.1 on snmp_community@x.x.x.x::::::v4only at cfgmaker line 951.
WARNING: Skipping snmp_community@x.x.x.x: as no info could be retrieved

Use of uninitialized value $comment_sysdescr in substitution (s///) at cfgmaker line 379.
Use of uninitialized value $sysname in concatenation (.) or string at cfgmaker line 412.
Use of uninitialized value $comment_sysdescr in concatenation (.) or string at cfgmaker line 412.
Use of uninitialized value $syscontact in concatenation (.) or string at cfgmaker line 412.
Use of uninitialized value $syslocation in concatenation (.) or string at cfgmaker line 412.
--base: Writing testS.cfg

C:\mrtg-2.17.4\bin>

meanwhile, i monitoring the same router from the same server using solarwinds NPM and everything works fine.

Thanks

[Abdel-Qader · Accepted solution]

the issue is resolved by activating snmp v1 at the router.