snmp on 3 com 4210

[vijayakumartt20]

Hai,

We are having seven 3com 4210  switches configured in cluster. ie One master + 6 members.  SNMP functionality has been enabled on all the switches using cluster snmp-agent command as per the 3com document. The SNMP information in all the switches are like 3com@cm0, 3com@cm1 3com@cm2 etc... ( Example only) . My requiement is to plot the network traffic utlization of the entire switch cluster using single SNMP. I am using prtg/cacti/mrtg for this. The thing is that when ever i access the snmp information with 3com@cm0 i was able to get master switch traffic only. If i use 3com@cm1 or 3com@cm2 i will not be in a position to get any thing. If any body in the group know the how to monitor the switch cluster using single SNMP string please let me know.

Thanks and Regards.

Vijay

[mkurzydlo]

Hello,

I've got similar problem like You. In my clutser I've got three 4210, and by community@cm1 or #cm2 I cannot get SNMP. Only community@cm0 works correctly.

Did You solve this problem ?

Best Regards

Michal