ACU command line ?

[Louis Coilliot]

On Linux I configure the arrays of my MSA 1500 from the Insight Web interface, after I authorized ACU XE with the command "cpqacuxe".

Is there any way to configure arrays from the command line under the Linux operating system ?

Thanks.

Louis Coilliot

[Luk Vandenbussche]

Hi,

You can use the CLI if you connect a serial cable between your server and the MSA array

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00147475/c00147475.pdf

[Louis Coilliot]

OK, no CLI with TCP/IP ?

[Basil Vizgin · Accepted solution]

You can use ACUCLI package.

[mits]

If you can acces HP knowledge database, check document, KBQA00000668, HPACUCLI, HP Array Configuration Utility ã »Command Line Interface. The utility guide is available.
http://www.hp.com
-> Search "Array Configuration Utility User Guide"

You can download the software.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=88837&prodNameId=346361&swEnvOID=2027&swLang=13&mode=2&taskId=135&swItem=ux-33566-3

[Louis Coilliot]

Great, thanks.

Louis