Bios disabled on NetRAID-4M

[Viargues Maxime]

Hi,

I have recently installed a HP NetRAID-4M in a PC but when RAID card is booting I can't press to enter Configuration Utility.

The exact message is :
"Press for Configuration Utility
Press to Abort waiting for controller to Start

Waiting for Array Controller #0 to start"
(after few seconds)
"Array Controller started
Controller Monitor V2.4-2, Build 4632
Controller Kernel V2.4-2, Build 4632
Controller POST operation successful
BIOS is disabled

BIOS not installed!"

When I press Ctrl+A nothing occurs but Ctrl+k is working. I have also tested Ctrl+Q because it's ...

[Jack Forrester]

Im having the same problem in a K7D master's 64bit slot.

the last lines read...
post sucsessfull -(after far longer than usual in the old board)-
Press for Configuration Utility
press ENTER to accept changes (iv tryed enter and return)
defualt is enter after 30 seconds

but nothing happend ctrl+alt+del do not restart the computer and all the keys are frozen.
bios is build 4632