Create Vraid in Command View EVA

[Sansoen Chumphunut]

How to Create Vraid 0+1 or Vraid 10 in Command View because i see only Vraid 0,1,5,6 on menu. Pls advise.

[Johan Guldmyr]

Hi, well you would have to create a vraid1.

You don't have that kind of control on the EVA that you can create vraid 0+1 or vraid10.

vraid1 is using all disks (in pairs) in the disk group.

Maybe this post can describe it also:

http://h30499.www3.hp.com/t5/Storage-Area-Networks-SAN/How-to-Setup-Raid-1-0-on-EVA-5000/m-p/3483618

[Uwe Zessin]

VRAID-1 is a marketing name. It implements striped mirrored chunks. The striping is across all disk drives in the disk group the virtual disk is located in.