Disable 3200 Array Controller

[Ayman Altounji]

I have an ML570 with two 5300 array controllers running two sets of drives. the problem is that there is a 3200 array controller as part of a multi I/O board. how can i disable the 3200 so that i don't have to press F1 to continue.

[Ayman Altounji]

you do not have to diable the controller to get rid of the f1 prompt. Boot to f10 at the main menu doa this will enable advanced mode..chose system config...configure hw ....review and modify... then option 3 (view and edit) in there scroll down the option till you see advanced features under that heading is f1 prompt set it to disabled, andn you will no longer get that prompt....To disable the controller scroll down to device on the list select controller resources and set that to disabled either option should work fine.

[Ayman Altounji]

Easiest way is to pull out the small 3200 card from the multi IO card - works a treat.

[Ayman Altounji]

CKS has the simplest solution...