NetRAID-1M

[Tobias Schneider]

Hi all,

does the NetRAID-1M support RAID level 5?

Thanks,

TS

[malvin drakley · Accepted solution]

Hi Tobias,
at boot time, you will be given an option for "experienced users" to hit CTRL+m key and this will take you into the setup option. The first thing you need to do is to set up a configuration and this will allow a Raid 5 option with a minimum of 3 discs. When you have set up your configuration you then need to go into the initialize screen and initialize your array. You are then ready to load your operating system
hope this helps
malvin drakley