OVSAM 3.2 on the SMA III

[Rocky_8]

Hi,

I installed SAM on the SMAIII.
I have a problem registering the service on the manage tools page.
I followd the same procedure as with version 3.1, but the SAM service states it is in ERROR state.
Is there any change in the way v3.2 registers itself on the SMA ?
Way of registration comes from the PDF "Installing/Using SAM on the SMA"

Any help is appreciated,

Rmk

[Uwe Zessin · Accepted solution]

Hello Rocky,
I have successfully used the scripts with OVSAM 3.1 and 3.2. You know there are two different commands whether you have put the host agent on the SMA or not? The only problem I had was that a simple cut&paste from the PDF document did not work - I had to manually replace the '"' characters with their simple ASCII version. I'll attach my versions of the scripts so you can compare.

File: SAM-reg1.bat - run always

[Uwe Zessin]

File: SAM-reg2noHA.bat - run when host agent is not installed

(I have never really used this file, it's untested)

[Uwe Zessin]

File: SAM-reg2withHA.bat - run when host agent is installed

[Rocky_8]

Uwe,

Thanks, and i have tried it like with v3.1.
I will use your script files instead.

i'll give it a try right now

rmk,

[Rocky_8]

Uwe,

Thanks !

It worked, guess u were right with the copt paste issue.

Thanks again !

Rocky