Smart Array Controller (EISA), spare 181132-00, assembly 003596-002

[Ayman Altounji]

Where can I get the documentation for theSmart Array Controller (EISA), spare 181132-00, assembly 003596-002, Smart+ Array Controller (EISA)

[Mark Cloutier · Accepted solution]

Can I please have your e-mail address as the file is too big to post here.
thanks.

[Ayman Altounji]

Can you please mail me the documentation too?

[Mark Cloutier]

E-mail address please.

[Ayman Altounji]

ironoak12@hotmail.com

[Steve Roe_1]

Hi Mark,
Can I get a copy of the docs also?
My email is...
xLr8r@compuserve.com

TIA,
Steve

[Jeremy Wortman]

Mark, I am looking for the *.cfg eisa configuration files and windows NT 4.0 and 2000 (if exist) drivers for a Smart+ Array Controller. It uses spare# 181132-001. If you can help, please let me know.

Thank you,
Jeremy
Nosferatuality@hotmail.com

[Ken Klang]

I also have one of these eisa smart array controllers from a 4500R proliant server. i'm trying to install windows 2k server on it and after it gets done with the copying files to hard drive, it reboots and I get a "a disk read error occurred" press Ctrl alt delete to restart".

I saw one post and they guy had said to get the latest firmware. I have 2.26 on here and I can't seem to find anything higher. I downloaded the 4 disk pack off of compaq's site labeled "Options ROMPaq For Array Controllers
version 3.10 A (11 Jun 02)
" and booted from every disk and it said it couldn't find any supported devices.

Thanks for any help in advanced.

Ken

My email is kkmonte@aol.com

[Lienhard David]

hi...

can you mail me the documentation to??

d.lienhard@com-design.ch

thank you =)

[Tobias_6]

good afternoon,

may you send me the the documentation of the following SCSI card?

Assemby No: 003596-002
Spare: 181132-001

thank's a lot!

with kind regards,
T.Houweling

th@zli.ch

[Ken Klang]

Well if it helps any of you guys, I went and bought a smart 2/2E EISA card to replace the regular smart arrray controller. Worked fine.. SO my guess is that its not supported under windows 2k or xp...

[Steve Roe_1]

Did anyone get a reply to their request for
documentation? I posted a request in Dec. 02
and haven't heard anything.

Is this thread dead or is Mark Cloutier/Tech
Support monitoring it. I have seen many links
on Compaq's confusing support site to the
Smart Array Controller 181132-001, but nothing
specific regarding documentation for the board.

Any info on settings/configuration for this is
appreciated.

Regards,
Steve