Virtual Array 7100

[Vincent_5]

Hi,
Can someone please advice if Red Hat Linux version 7.2 can support VA7100 (virtual array). There is about six disk on the array and is link to a rp4610 model server. The problem is, it don't seems to see all the luns that is created, example if I created two luns, I can only see one during the pre-system check before the Red Hat Linux boots up.


Regards
Vincent

P.S.This thread has been moved from MPE/iX>Printers/Spooler Management to Storage > Disk > Disk Array- HP Forums Moderator

[Eric Sorensen_1]

Hello Vincent,

This forum is for MPE and issues related to MPE. You might find an answer in the Linux or storage forums.

The "drivers and download" page for the VA7100 offers software for Linux 7.1, but not for 7.2:
http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=hpsurestor30307&l=en&c=Software

[Vincent_5]

Hi Eric,
Thanks for the Info, but now assuming that I have a total capacity size of 350GB avaliable, why I can only create 1 Lun of 250GB, can you advice is this normal and where is the rest of the disk space.


Regards
Vincent

[Eric Sorensen_1]

Hello Vincent,

I suggest you post your question in the "storage" forum.