HPE Community
Disk
1833590 Members
4124 Online
110061 Solutions
New Discussion

Re: Adding 18GB Drive

 
Ayman Altounji
Valued Contributor

‎12-13-2000 04:00 PM

‎12-13-2000 04:00 PM

Adding 18GB Drive

Proliant 3000
Novell Netware 4.11
Smart 2/DH Array Controller

Currently running Raid5 with 3 18GB Drives in single array(Netware VOL_1). I want to add a single 18GB Drive for a second Netware Volume. I believe I should install the drive, use cpqonlin.nlm to create a second array, and then use install.nlm to create the partition and volume. Is this the correct procedure? Is there a problem with using only one drive in the second array? Please let me know. Thanks for your help in advance.
0 Kudos
1 REPLY 1
Ayman Altounji
Valued Contributor

‎12-19-2000 04:00 PM

‎12-19-2000 04:00 PM

Re: Adding 18GB Drive

There is no problem with using a single drive , on the second Array ( Array B) Run the ACU to configure the drive .
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.