HPE Community
Disk
1833449 Members
3103 Online
110052 Solutions
New Discussion

Drive Status Changes

 
Ayman Altounji
Valued Contributor

‎02-17-2001 04:00 PM

‎02-17-2001 04:00 PM

Drive Status Changes

I am working in a vendor company. I often heard from clients that Storage Agent reports for a status change of drives. But I can't find the description of the status (e.g. .... change to a status of 4) from either compaq web or quick find DC. Can anyone tell me the meaning for the status of drives? Thanks a lot!
0 Kudos
1 REPLY 1
Ayman Altounji
Valued Contributor

‎02-19-2001 04:00 PM

‎02-19-2001 04:00 PM

Re: Drive Status Changes

When you get a "status=x" message, this means one of the following things:

1=other, 2=unconfigured, 3=ok, 4=threshexceeded,5=predictivefailure, 6=failed

Since they are seeing a "4" status, most likely some threshold is beeing exceeded. May be user set or hardware.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.