HPE Community
Disk
1856523 Members
5834 Online
104113 Solutions
New Discussion

Re: help with scsci hot swap drive

 
Lear Zumaeta
New Member

‎12-31-2003 02:22 AM

‎12-31-2003 02:22 AM

help with scsci hot swap drive

I have a 18.2 gb scsi drive in my server and it had the activity led green status on a static mode, no blink, and the server can`t see it, please somebody tell me what means this static led and how can I solve the problem
0 Kudos
2 REPLIES 2
JohnWRuffo
Honored Contributor

‎12-31-2003 03:07 AM

‎12-31-2003 03:07 AM

Re: help with scsci hot swap drive

Have you re-boot the server? If so, and the light is still constant you should run the Server Diagnostics or ACU to make sure the controller can see the drive at boot.
It could be trouble at the backplane or just a flaky drive.
Let us know what happens?
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
T. M. Louah
Esteemed Contributor

‎01-01-2004 03:42 AM

‎01-01-2004 03:42 AM

Re: help with scsci hot swap drive

IO issue or bad drive, first system should see the Hardware component then you can work at the volume level.
Some details are missing, are runing HP-UX ? was the disk part of a volume group .. is it part of a DiskArray of some sort ?
Little learning is dangerous!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.