N4000 rp7400 disk compatibility

[doris grady]

Can anyone confirm that the rp7400 N4000 supports the A9768A 36GB 15K disk? Can't seem to track it down to a yes.
Thanks.

[Bernhard Mueller]

Doris,

I assume you mean to use as internal disk, then the answer is no. There is no 15K disk for the two internal disk slots of the N-class, the required 36GB 10K disk would be A6089A.

Regards,
Bernhard

[doris grady]

Thanks. is the 6740A 10K 36gb also supported? That is the pn my colleague was given for the 10K. Is one newer that the other? thanks

[Bernhard Mueller]

Doris,

this is also a SCSI U160disk, the N-class can only take Ultra2 internally.

you'll find all (well most) information on
http://partsurfer.hp.com

Regards,
Bernhard

[Bernhard Mueller]

I'was not quite correct
these are your choices:

A5505A 9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)

A5505AR 9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)

A5531A 18GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 10,000 RPM, low profile (Seagate ST318203LC)

A5531AR 18GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 10,000 RPM, low profile (Seagate ST318203LC)

A6089A 36GB hot-plug Ultra-2 Low Voltage Differential (LVD) SCSI SCA hard drive - 10,000 RPM, low profile (Seagate ST336704LC)

A6089AR 36GB hot-plug Ultra-2 Low Voltage Differential (LVD) SCSI SCA hard drive - 10,000 RPM, low profile (Seagate ST336704LC)

A6727A 73GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector

A6727AR 73GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector

Regards,
Bernhard