Cray XD670 SNMP Polling setup

[T_E]

Hi all,

We have a cluster hosted with our datacenter vendor that is compromised mainly of HPE ProLiant DL365 Gen11 servers, but also includes one Cray XD670 node. For the HPE nodes we have configured them so that a central polling server can interact with the iLO interfaces using SNMP polling for monitoring.

We would like to do the same for the Cray node. However, for the BMC interface there, looking around and from documentation it appears that we can only set it up to do SNMP traps via the Platform Event Filter options.

Can anyone clarify if this is correctly understood? Does the BMC interface not support a polling SNMP monitoring setup?

[shiva_jr]

Hi @T_E ,
    I did not get a proper document for your query about the SNMP Polling on Cray XD670.    Please refer this document, you may get the required detail.
    Please try to get the polling option in 'SNMP configuration' section of BMC GUI. You may get options as enabling the SNMP Service, Setting an SNMP version, Configuring the community strings, credentials etc. 

Regards,
Shiva_jR