Procurve E2620 - Stacking Issue

[Bact]

Hi All,

Having difficulties adding a HP Procurve to a stack.

- Candidate = Procurve E2620

- Commander = Procurve 2560 (J4899A)

- Stack contains 11 members, including commander

- Commander is set to auto-grab

- E2620 is set to Candidate, Auto-Join, and Interval = 60 seconds

- Reboot does not effect commander seeing candidate

- No password for Manager on E2620

Any assistance here?

[Bact]

Bump, any ideas on how to correct this issue?

[Bact]

Fixed by removing switch from stack via command line.  Then auto-Joining switch to stack via command line.

The GUI didn't seem to work.

[jamestalmage]

I'm having the same issue here with a 2530 as stack commander, and a 2620 as a candidate.

I'm not understanding how you "removed" the switch from the stack if you never got it to add in the first place?