Continues Access reverse copy fail

[yongye_1]

Hi,

We have 2 XP1024 configured with Continues Access. Today we performed a reverse copy test. But failed with below error messages,

----------------------------------------------
brdb-p02:/HORCM/log0/curlog/horcmlog_brdb-p02#pairresync -g c16nb
pairresync: [EX_CMDRJE] An order to the control/command device was rejected
Refer to the command log(/HORCM/log0/horcc_brdb-p02.log) for details.

CMDLINE : pairresync -g c16nb
22:04:29-0b788-00304- ERROR:cm_sndrcv[rc < 0 from HORCM]
22:04:29-114a8-00304- [pairresync] L_CMD(CREATEPAIR) ERROR :rc = -35
22:04:29-14378-00304- [pairresync][exit(221)]
[EX_CMDRJE] An order to the control/command device was rejected
[Cause ]: An order to the command(control) device failed,or was rejected.
[Action]:Please confirm the following items.If this trouble doesn't resolve,then collect HORCM error logs(HORCM
_LOG=/HORCM/log0/curlog) and trace data,and send them to service personnel.
(1) Check if the 'HORC or HOMRCF function' is installed in the RAID.
(2) Check if the RCP and LCP are installed in the RAID.
(3) Check if the path between the RAID CUs is established by using the SVP.
(4) Check if the pair target volume is an appropriate status.
COMMAND ERROR : EUserId for HORC[0] : root (0) Wed Feb 28 22:18:56 2007
----------------------------------------------

I am appreciate someone can give us help on this error. Thanks.

Regards,
Sun Yongye