EVA P6500 Link module error

[meero]

Dears

After reboot EVA P6500 i found that error

SC Event Code: 06558906 - An Enclosure Link Module has been failed, and can no longer be used to detect drive position information, or to issue bypass/unbypass commands.

[rmv978]

The issue points to a faulty I/O module in the particular disk enclosure,reporting the error.

Select the disk drive on the disk enclosure reporting this error.Loop A or Loop B should be in "not in use" status on the right pane.

Try re-seating the I/O module A or B based on the above result.

If issue persist I/O module A or B of the enclosure should be replaced.

For part replacement you may need to log a support call.

[meero]

Thanks i will try these steps