EVA

[Kites BM]

Hi,

On a daily basis I check the event logs on HP EVA 4400, in the management logs for the server I get to see the following

"Parsefile for current firmware version not found. Upload correct parse file. CR153F"

EVA is healthy and funtioning normal.

is this error or just an another event?
How to fix it?

Thanks,
Kites

[Torsten.]

You need to load this information from sss file into command view. What firmware is running?

[Francisco Mata_1]

You need to put this parse (HSV300_event_CR153F_09522000.txt) file through command view eva, using the send parse file button in the view controller events.

Note: unpack it first.

F. Mata.

[Víctor Cespón]

CR153F means 09522000

Get the parse file from the firmware download

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T4256-63129

Or from the attached file

Select the EVA, go to view events, controller event log. Press "Send parse file", give it the TXT or SSS file.

[Kites BM]

Would sending the parse file to the controller will cause any disruptions or damage to the system?

Any outage needed to do so?

Kites

[Uwe Zessin]

No, it is not even sent to the controller. It is processed by the Command View service and stored on the CV management server.
(I've done multiple times, already)

[Torsten.]

The file is like a dictionary used by commandview "translating" codes to text.