MSA 2312fc Host mapping problem

[EDDIE FARKHONDEH]

We have a new MSA 2312, I'm used SSP in MSA100. 2312 is different as far as host maps and I'm not sure if I'm doing correctly. I have created a Vdisk and one volume but that volume was presented to other server, I think I made it to be explicit but had to luck. What is a correct way of presenting a volume to a host and only that host?

any help would be appriciated.

Thanks

[marsh_1]

hi,

all that info is n the user guide :-

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01394283/c01394283.pdf

hth

[EDDIE FARKHONDEH]

This user guide does not get in to level of detail I'm looking for. Our MSA has two controllers, I have two hosts conected, how do I make sure each host sees the volume they are presented to? they way I have it set up all host see all volume. I used the explicit set up and that did not help either.

Thanks

[marsh_1]

hi,

well if you did'nt get on with the mapping section in that , how about the map volume command in the cli :-

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01755995/c01755995.pdf

hth