False Remote Insight/ Integrated Lights-Out self test errors?

[Kerry Quillen]

Anyone had issues where Oneview reports a server having a Remote Insight/ Integrated Lights-Out self test error 8192 but when you log into the ILO interface no errors exist.  I can clear this error in OV but it will eventually come back.  I've seen this with BL460C Gen8 & 9's as well as some DL380 Gen8 & 9's.  OV version is  4.10.04.  

[ronissac]

Hi Kerry ,

Kindly refer to the below advisory

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04996097

If you feel this was helpful please click the KUDOS! Thumbs below!

Ronny

[MeFromil]

Hi

1.  Upgrade the iLO 4 firmware to version 2.61 
2.  Preforme NAND format  From Ilo Page
3 .  Check the iLO  Health status If the iLO status is normal - Done  (recomanded to update the HPIP )
4.  if theI ILO Health Status is still is Degrded  it need to replace the system board

[Kerry Quillen]

Ronny & MeFromil - there is no ILO error to fix.  If I log into the ILO interface, the ILO shows healthy and there's nothing in the logs.  The issue is that Oneview thinks the ILO is unhealthy.  I'm unfortunately way too familiar with that advisory and the steps to reformat the NAND having had many issues with many Gen8 servers and 8192 errors.  However, I did perform te advisory steps anyway before creating this post.  Refreshed the server in Oneview and all was good but a few days later Oneview thinks the ILO is faulty again.

[JSobejana]

So is there a solution to this? I am in the same boat, IML and Diagnostics appears to be ok, after resetting ilo issue will come back up in a few days.

[MeFromil]

hi

if nanad format  +  reset server bay dont help

only syste board replace will fix the issue