HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

OneView 5.0 SCOM Errors on Event Manager

 
SOLVED
Go to solution
Highlighted
Occasional Visitor

OneView 5.0 SCOM Errors on Event Manager

Hi,

Can someone please further explain to me what else do I need to do.Upon checking HPOneViewEventManager.log, I found these errors below. Is this something critical?

[5/5/2020 3:02:25 AM PID=6676] Error: Data collection error. Error message:The user DOMAIN\SCOM$ does not have sufficient permission to perform the operation.
[5/5/2020 3:02:25 AM PID=6676] Warning: ==== Data not collected from SCOM since none of the appliance has been discovered yet.====
[5/5/2020 3:17:25 AM PID=6676] Error: Data collection error. Error message:The user DOMAIN\SCOM$ does not have sufficient permission to perform the operation.
[5/5/2020 3:17:25 AM PID=6676] Warning: ==== Data not collected from SCOM since none of the appliance has been discovered yet.====
[5/5/2020 3:32:25 AM PID=6676] Error: Data collection error. Error message:The user DOMAIN\SCOM$ does not have sufficient permission to perform the operation.
[5/5/2020 3:32:25 AM PID=6676] Warning: ==== Data not collected from SCOM since none of the appliance has been discovered yet.====
[5/5/2020 3:47:25 AM PID=6676] Error: Data collection error. Error message:The user DOMAIN\SCOM$ does not have sufficient permission to perform the operation.
[5/5/2020 3:47:25 AM PID=6676] Warning: ==== Data not collected from SCOM since none of the appliance has been discovered yet.====
[5/5/2020 4:02:26 AM PID=6676] Error: Data collection error. Error message:The user DOMAIN\SCOM$ does not have sufficient permission to perform the operation.
[5/5/2020 4:02:26 AM PID=6676] Warning: ==== Data not collected from SCOM since none of the appliance has been discovered yet.====
  • HPE Oneview SCOM Integration was successfully installed using an account with Admin privileges.
  • HPE Oneview appliance was successfully added via Configuration Dashboard on SCOM.
  • Account used is the local Administrator on OneView appliance since the appliance is not integrated to AD.
  • Environment: Windows Server 2016, SCOM 2019

 

 

2 REPLIES 2
Highlighted
HPE Pro
Solution

Re: OneView 5.0 SCOM Errors on Event Manager

The errors are clearly indicates that HPE OneView Event Manager is running with low privilage user. I would suggest to do following

- Stop HPE OneView Event Manager service

- Go to properties and select logon tab

- Check the This Account radio button

- Provide the local administrator user id and password.

- Press ok and start the service.

refer to the log file again and if same messages are logging, please log a support case with HPE.


I work for HPE

Accept or Kudo

Highlighted
Occasional Visitor

Re: OneView 5.0 SCOM Errors on Event Manager

It's working no longer showing errors now. 

Thank you.