READ Snmp Hp oneview

[SupportNC2]

Hello, i try to access to one view biew snmp for monitoring my synergy.

I configure my community string in setting, snmp but i cant access to snmp...

snmpwalk -v2c -c nc2snmp 192.168.9.1
Timeout: No Response from 192.168.9.1

Have you good an idea for this problem? thanks

[Sharis]

Hello,

FYI,

SNMPv1 read community string
Credential applied to access data on managed and monitored devices that support SNMPv1 only.

So make sure your read community string is SNMPv1.

Also make sure that you are able to ping to your IP 192.168.9.1 from Synergy setup.

Regards,