HPE Community
HPE ProLiant Storage Systems
1844074 Members
2700 Online
110227 Solutions
New Discussion

P400 array expand problem

 
SOLVED
Go to solution
kalamburgud
Occasional Contributor

‎08-25-2007 12:12 AM

‎08-25-2007 12:12 AM

P400 array expand problem

Hi,

I have a problem with expanding existing array (with one logical drive: 4 disks in RAID 1+0) with the two new disks.

There is no option to add new disks in array A and expand in ACU...
We updated firmware and drivers for controller and installed latest ACU.

Array accelerator is enabled.We dont have BBWC.
0 Kudos
2 REPLIES 2
Patrick Terlisten
Honored Contributor

‎08-25-2007 06:33 AM

‎08-25-2007 06:33 AM

Solution

Re: P400 array expand problem

Hello,

you need an BBWC to do this online. The other way is to do it offline after booting SmartStart and use the ACU on that CD.

Best regards,
Patrick
Best regards,
Patrick
0 Kudos
kalamburgud
Occasional Contributor

‎08-25-2007 10:16 PM

‎08-25-2007 10:16 PM

Re: P400 array expand problem

Thanx!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.