HPE SimpliVity
1825578 Members
1388 Online
109682 Solutions
New Discussion

Re: InfoSight Released yet?

 
SimonHorwood
Advisor

InfoSight Released yet?

Hi

I've had a fair amount of mails from the account team about Infosight for Simplivity but I can't see anything on it on the Infosight page. Any dates yet?

Cheers

Simon

 

14 REPLIES 14
DaveOb
HPE Pro

Re: InfoSight Released yet?

InfoSight is not released yet.It is a top priority so it should be in released in the short term.


I am an HPE employee
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
SimonHorwood
Advisor

Re: InfoSight Released yet?

Cheers Dave!

jfrobs
Frequent Advisor

Re: InfoSight Released yet?

Hello its for VMWare only ?? or Hyper-v is in the loop ?

 

 

TomiKarlsson
Advisor

Re: InfoSight Released yet?

Hi. It didn´t say in the blog. Have to look for more information. Maybe some of HPE guys knows?

/Tomi

jfrobs
Frequent Advisor

Re: InfoSight Released yet?

I think its ok now for Vmware only  :

I have this on my InfoSight console : 

Registering Your HPE OmniStack Hosts with HPE InfoSight

Prerequisites
  • All HPE OmniStack hosts use HPE OmniStack 3.7.8 software.

  • HPE OmniWatch feature remains enabled (default setting).

  • Manually enabled the HPE InfoSight registration feature in HPE SimpliVity Plug-in for vSphere Client.

Procedure
  1. Click HPE Server Registration to obtain a token and copy it. (You need to copy the token to paste it into vSphere Client.)
  2. Log in to vSphere Client (HTML5) with HPE SimpliVity Plug-in already installed.
  3. From vSphere Client Home, click Global Inventory Lists. Then click Clusters.
  4. Click a cluster from the table. (The registration applies to all the clusters in the federation.)
  5. Click the Configure tab.
  6. Under More, click HPE OmniWatch.
  7. In the HPE InfoSight Registration section, paste the token you obtained in HPE InfoSight into the HPE InfoSight Claim Token field.
  8. Click Register. It can take up to 24 hours to populate HPE InfoSight with your federation data
cheesi
Advisor

Re: InfoSight Released yet?

Manually enabled the HPE InfoSight registration feature in HPE SimpliVity Plug-in for vSphere Client.

Is there a step-by-step guide for this action. Because i cant find anything.

crosbyc
New Member

Re: InfoSight Released yet?

I can't find OmniWatch under More when clicking Global InventoryLists->Clusters

MikeSeden
HPE Pro

Re: InfoSight Released yet?

 

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company
Accept or Kudo
fahlis
Frequent Advisor

Re: InfoSight Released yet?

InfoSight is fully released today.

There's som more manual steps to enable it, see below. However even after following those I still I can't find OmniWatch under More when clicking Global InventoryLists->Clusters.. Using OmniStack 3.7.10


Enable the registration action (VCSA)
Log in to VCSA with root credentials. Enable shell commands with these commands:
>shell.set –-enable True
>shell
3. Run commands in the following order:
a) cd /etc/vmware/vsphere-client/
b) ls
If com.simplivity.client.properties file does not exist proceed to step c. If it does exist, go to
step g.
c) touch com.simplivity.client.properties
d) chown vsphere-client:users com.simplivity.client.properties
e) chmod 644 com.simplivity.client.properties
f) ls -all
This command verifies that properties are the same as the webclient.properties.
g) vim com.simplivity.client.properties
h) Add the following text:
# Enable display of InfoSight registration
com.simplivity.common.enableInfoSightRegistration=true
i) Save the file and exit:
Pres ESC and enter :wq.
j) Stop and start the vsphere-ui service:
service-control  --stop vsphere-ui
service-control  --start vsphere-ui
4. Reload the vCenter Server Web user interface.

Register with HPE InfoSight
Procedure overview
Use this procedure to register your HPE OmniStack hosts with HPE InfoSight.
After registration is complete, wait 24 to 48 hours to view your federation details in the HPE InfoSight portal.
Procedure
1. If not done already, create an HPE Passport account as described at: https://cf.passport.hpe.com/hppcf/
createuser.do
You can use an existing account instead, if you have one.
2. Log in to HPE InfoSight with your HPE Passport account: https://infosight.hpe.com.
HPE InfoSight registration 8
For new accounts, verify your account through the automatic message sent to your mailbox from HPE
InfoSight.
3. Obtain a claim token and copy it.
• If you are using a new account, click HPE SimpliVity Registration to obtain a claim token and copy it.
• If you logged in with an existing account, in Settings, under Servers, select My Organization and select
Device Enrollment. Then, obtain a claim token and copy it.
4. Log in to vSphere Client (HTML5) with the HPE SimpliVity Plug-in for vSphere Client installed.
5. From vSphere Client Home, click Global Inventory Lists. Then click Clusters.
6. Click a cluster from the table.
Registration applies to all the clusters in the federation.
7. Under More, click HPE OmniWatch or HPE InfoSight.
NOTE:
If you are using vCenter Server 6.7 U1, the HPE OmniWatch option is located under Cluster→HPE
OmniWatchConfigure.
8. In the HPE InfoSight Registration section, paste the claim token you obtained in the HPE InfoSight portal in to
the HPE InfoSight Claim Token box.
9. Click Register.

Anyone from HPE Support who can assist us on how to get the option visible under "More"  ?

Br / Tony

DeclanOR
Respected Contributor

Re: InfoSight Released yet?

Hi @cheesi @fahlis @SimonHorwood @crosbyc @MikeSeden 

The following should help for InfoSight:

Video - Registering with Infosight

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000479en_us

Infosight for SimpliVity user guide:

https://support.hpe.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-a00089726en_us&withFrame

Knowledge Article - Troubleshooting Infosight Connectivity issues

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=sf000044504en_us

[Moderator edit: Removed the broken link]

Hope this helps.

Thanks,

DeclanOR  #I am a HPE Employee

Accept or Kudo



jfrobs
Frequent Advisor

Re: InfoSight Released yet?

And for Hyper-V ?? its on the roadmap ??

it's possible not to have a roadmap on simplivity. Hyper V is always one step behind. No granularity in backups, no Hp Insight...

DeclanOR
Respected Contributor

Re: InfoSight Released yet?

Hi @jfrobs 

Hyper-V is relatively new as a supported Hypervisor, so it is going to take time for it to evolve to a similar point as to where our vSphere platform is at. It is evolving quickly however, so I'm sure the functionalities you mention will also become available in the future.

Right now, for the first integration of SimpliVity into InfoSight, only vSphere is supported. 

Good news for you however....Hyper-V is expected to be supported on InfoSight in the next SimpliVity release (4.0) ETA for general availability January next. So we are not forgetting about our Hyper-V customers!!

Thanks,

DeclanOR  #I am a HPE Employee

Accept or Kudo



jfrobs
Frequent Advisor

Re: InfoSight Released yet?

Thx for your fast reply