Simplivity deployment stuck

[NAN11]

Hi,

I have a new deployment of 3 Simplivity servers in a greenfield environment.

The first deployment was not fully successful because of lack of 3 NTP servers.

I deleted the cluster from vCenter and started from scratch.

I have deleted RAID6 Array and recreated RAID1 Array, as described here: https://support.hpe.com/hpesc/public/docDisplay?docId=sf000067656en_us&docLocale=en_US

Deployment Manager can't get past Test Host Settings with errors:

Host network setup failed and

Virtual Controller network setup failed.

The deplyment log shows something other:

The OmniCube at xx.xx.xx.xx:9292 is already claimed by another deployment.

Any idea why this is happening?

Regards,

Eli

[gustenar]

Hello @NAN11 

Is it possible that you have two instances of Deployment Manager running? 

[NAN11]

Hello @gustenar ,

Thanks for your feedback.

You got me wondering if this could be the case, because the virtual machine I was using for Simplivity Deployment Manager is running for few weeks and Deployment Manager was started multiple times.

Unfortunately, after rebooting the VM everything remains the same.

Regards,

Eli

[giladzzz]

Hi

try installing a new clean windows server VM with new deployment manger

it is easy to do and removes a lot of problems

Regards