SimpliVity plug-in reinstall

[adam900331]

Hy!

Are there any bes practise to reinstall de curretn SimpliVity plug-in of vCenter? I found this article, which include these step: uninstall the plug-in and install again. Are there any configuration step after the reinstall?

https://www.bitcon.be/how-to-install-the-hpe-simplivity-380-vcenter-plug-in/

Thanks.

[adam900331]

Anybody help?

[Sanika · Accepted solution]

Hi adam900331,

Looks like you want to know the details on how to upgrade the vCenter SimpliVity Plug-in and details on configuration changes post-upgrade.

You can refer to the below HPE Videos for more information on how to install/uninstall/upgrade the vCenter SimpliVity Plug-in.

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000008en_us

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000262en_us

Reference Document for installation: https://support.hpe.com/hpesc/public/docDisplay?docId=sf000044510en_us&page=index.html#steps

Also for the configuration changes and prerequisites details, you can refer the below document:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00126380en_us

These are some additional resources regarding software upgrades you may find useful:

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000116en_us

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vtc00000117en_us

Regards,
Sanika.