HPE SimpliVity
1832348 Members
2276 Online
110041 Solutions
New Discussion

SVTFS doesn't start

 
triiuak
Senior Member

SVTFS doesn't start

Hi all,

We have a problem with cluster. When I restart the OVC, first 2-3 min everything looking good. After 2-3 min later, when i tried the svt-federation-show, i saw the a OVC faulty.

When i check the svtfs, i saw below message.

administrator-vsphere@omnicube-ip100-14:~$ systemctl status svtfs@0
● svtfs@0.service - SimpliVity OmniCube Instance 0
Loaded: loaded (/lib/systemd/system/svtfs@.service; enabled; vendor preset: enabled)
Drop-In: /lib/systemd/system/svtfs@.service.d
└─01-svtfs-sva-additional.conf
Active: failed (Result: core-dump) since Thu 2024-03-14 08:15:42 UTC; 1h 0min ago
Process: 4260 ExecStopPost=/usr/share/simplivity/systemd/svtfs.sh poststop (code=exited, status=0/SUCCESS)
Process: 4058 ExecStart=/usr/share/simplivity/systemd/svtfs.sh start (code=dumped, signal=ABRT)
Process: 3635 ExecStartPre=/usr/share/simplivity/systemd/svtfs.sh prestart (code=exited, status=0/SUCCESS)
Main PID: 4058 (code=dumped, signal=ABRT)

2 REPLIES 2
s-
HPE Pro

Re: SVTFS doesn't start

Hi @triiuak 

Based on description, indeed, SVTFS is crashing and generating the core dump. SVTFS may crash for multiple reasons like hardware, network or some known  issue. Howeve,r It require log/cores analysis to find out cause and once we have a cause we can share solution.
I would request you to open the case with support so some can look at logs/core ASAP.

Regards,

Jaipal

I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Desiknes
Senior Member

Re: SVTFS doesn't start

Have you already checked if the nostart file is present?