HPE StoreEver Tape Storage
1867760 Members
1575 Online
110516 Solutions
New Discussion

WORM rejecting while writning data

 
tinakibru
Occasional Visitor

WORM rejecting while writning data

We have delivered the HPE LTO-8 30TB WORM Cust Lbl 20 Crtg. However, during the inspection, client encountered an issue where the cartridges are being rejected when they try to write data to them.
The client is currently using Oracle Secure Backup 12.1.0.2.1 with an Oracle StorageTek SL150 tape library and an IBM LTO-8 drive. The backup fails when using the LTO-8 WORM cartridges, with the following error:
Write failed: medium is write protected (OB SCSI device driver).
1 REPLY 1
NarayanKK-SO
HPE Pro

Re: WORM rejecting while writning data

@ tinakibru

There are two possible causes for the write-protect (WP) condition being reported:

  1. The write-protect notch on the tape cartridge, located on the front side near the barcode label, may be set to the locked position.
  2. The write-protect detection mechanism within the tape drive may be malfunctioning.

In most cases, it is unlikely that the tape cartridge itself is write-protected. We recommend verifying that the WP notch is in the unlocked position. If the cartridge is not write-protected and the issue persists across multiple tapes, the tape drive should be inspected further, as the write-protect sensing mechanism may require attention.

We hope this helps clarify the issue. Please let us know if you need any additional assistance.



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo