Install Issue

[Angoora-1]

Hi,

I updated the firmware as per the below Service Pack. Only 3/4 components are inatalled. In ILO, the changes have taken place and it has updated according to the Service Pack. Normally, I never see only 3/4 components are installed. If 4/4 components are staged, I see 4/4 are installed. In this case 4/4 INSTALL is missing. My question is, should I update again? Kindly give your advice, what should be done in this scenario. Thanks

OneView

[Greeshma21]

Hi @Angoora-1 ,

• Check iLO and OS to see reported versions for all 4 components.
• Review the update installer log and iLO/system event log for errors related to the missing component.
• Reboot the server during a maintenance window if the package is staged.
• If the component still isn’t installed, reapply that single component or the full SPP, capturing logs.

Regards,
Greeshma

Thank You!
I work with HPE but opinions expressed here are mine.
HPE Tech Tips videos on How To and Troubleshooting topics

[Mamatha_J]

Hi @Angoora-1 

This behavior is not abnormal in HPE OneView and does not automatically indicate a failed update.
HPE firmware workflow separates staging, installation, and activation, so counts like “3/4 installed” do not always mean failure
One component may:
already match the baseline
be dependency-blocked
or be staged but not yet activated
HPE explicitly notes that firmware compliance should be validated by baseline status (OK), not just install count
Therefore:
You should not re-run the update blindly.
First confirm whether all components are baseline compliant or pending activation.
Only if a component is:
inconsistent with baseline, or
explicitly failed
then reapply the update or use reinstall options.
HPE References
Firmware install states (Staged / Installed / Activated):
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001276en_us
Firmware inconsistency & dependency behavior:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00003498en_us
Firmware update policies (skip/reinstall behavior):
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00005574en_us
Known partial install / staging advisory:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00138778en_us

Validate firmware baseline compliance (not just count)
In OneView → check:
“Baseline = OK”
NOT just “Installed count”
HPE defines:
“OK” = version matches baseline

Check if component is “Installed Pending Reboot”
If yes:
System is already updated but not activated

onsider reinstall only if mismatch exists

HPE recommends:
Use “Reinstall components” option if needed
This forces alignment even for compliant components
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00004827en_us

Reapply ONLY if there is inconsistency alert
If you see:
“Firmware inconsistent with baseline”
Then:
Reapply profile or update again (HPE recommended action)

If you find the reply helpful, please consider clicking on the "Thumbs Up/Kudo" icon.

Thanks &Regards,

Mamatha

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".