Help with IMC and switch privilege-mode

[MohammadH]

Hello

I want create user in imc for access the switch and set every user privilege level like some user only fiest level operator level and some operator level and i choose some coomd for the user to use and user with full access admin 

my question is what the best Module in the IMC for this ?

1- User Access Management Module

2- TACACS+ Authentication Manager

??

thank you

[Thunder_China]

TACACS+ is the right component that you should configure.

[MohammadH]

Hello Thunder_China

thank you for replay

can i do the configure i want in  User Access Management Module ? the same in  TACACS+ or not ?

thank you

[Thunder_China]

UAM component focuses on how PC client accesses the network, and TAM(TACACS+ Authentication Manager) component focuses on what commands the user (telnet or ssh) can execute after login the device.

[MohammadH]

Hello Thunder_China

so if i need to focuses on what commands the user use example (show vlan or sh ip ...) or which level (operator or manager) i need TAM(TACACS+ Authentication Manager  ?!!

Thank you

[Thunder_China]

Sorry, I am not very familar with TAM component, but I guess both of commands and level are supported.