Integrity Servers
1753635 Members
5615 Online
108798 Solutions
New Discussion юеВ

bl860ci2 / efi does see device

 
SOLVED
Go to solution
merieux
Frequent Advisor

bl860ci2 / efi does see device

Hi ,

I am trying to install a bl860ci2. On efi shell the command map does not return someone :

Shell> map
map: Cannot find required

An other precision :
HP Smart Array P410i Controller (version 3.26) 0 Logical Drives
Currently the controller is in RAID mode

Does the controller have to be in HBA mode ? If yes what is the procedure to do that ?

All idea are welcome .

Regards ,
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: bl860ci2 / efi does see device

You need to go into the controllers BIOS and create a RAID.

Shell> drivers

pick the number of the driver (n) and do

Shell> drvcfg -s

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: bl860ci2 / efi does see device

See chapter

Configuring RAID volumes using the ORCA menu-driven interface

in

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02110937/c02110937.pdf

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
merieux
Frequent Advisor

Re: bl860ci2 / efi does see device

thanks a lot