display firmware version for rx6600

[Donald Thaler]

how do i find the system firmware version for an rx6600 hp/ux 11.23

[Pete Randall]

Have you tried here?

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp?lang=en&cc=us&taskId=135


Pete

[Jozef_Novak]

Hello,

go to the MP command menu:

MP> CM

run the SYSREV command.

CM> SYSREV

and you get the FW revisions.

J.

[R.K. #]

Hi,

From OS:

#echo "selclass qualifier cpu;info;wait;il"|cstm|grep "PDC Firmware"
PDC Firmware Revision: 45.11 IODC Revision: 0
PDC Firmware Revision: 45.11 IODC Revision: 0


From MP
MP:CM> sysrev


SYSREV

Current firmware revisions

MP FW : E.02.29
BMC FW : 02.34
System FW : 45.11



Regds,
R.K.

[Pete Randall]

Oh, you mean the firmware that's installed on the machine??

Sorry, my bad.


Pete

[Donald Thaler]

the "selclass qualifier cpu;info;wait;il"|cstm|grep "PDC Firmware"

returns this error:

/sbin/sh: selclass qualifier cpu;info;wait;il: not found.


how do i get into MP ?

[R.K. #]

Hi,

For getting into MP, you need the MP ip address and its login and password. It is different from server ip address.

-R.K

[Torsten. · Accepted solution]

From a running system use

# machinfo

or connect to the MP (default = DHCP; name is mp+mac-address):

MP:CM> sysrev


BTW, An Integrity server has NO PDC firmware!

[UVK]

You can get that in different ways.

1) Go to MP > CM > sysrev
or
2) you can get it from cstm using the below
echo "selclass qualifier cpu;info;wait;il"|cstm|grep "PDC Firmware"

-uvk

[Torsten.]

As said earlier, no PDC on this server!

The MP result would look like this:

MP:CM> sysrev


SYSREV


Current firmware revisions



MP FW : F.02.17

BMC FW : 05.23

EFI FW : ROM A 05.66, ROM B 07.12

System FW : ROM A 02.03, ROM B 04.03, Boot ROM B

PDH FW : 50.07

DHPC FW : 01.23

UCIO FW : 03.0b

PRS FW : 00.08 UpSeqRev: 0c, DownSeqRev: 08

HFC FW : 00.03 SetRev: 00

[Donald Thaler]

when running cstm i get this:
cstm>selclass qualifier cpu;info;wait;il"|cstm|grep "PDC Firmware
^-- (Information) is currently disabled. --

[Torsten.]

Again, NO pdc in this server!

This command does not work.

CSTM only suggest to use machinfo.