Error while installaling OS on rx2660 integrity server

[shikhar_1]

Hi,

I have prepared the iso image cd for that.

Now i will boot with that cd and then efi shell then take to this directory
->EFI\HP\TOOLS\IO_CARDS\SmartArray
or EFI\HP\TOOLS\IO_CARDS\SAS

After that do we need to fire below command for sas upgradion:
saupdate.efi

Appreciaitng your response..

[Zygmunt Krawczyk]

I'm not sure which controller you have.
At the beginnig of the thread you wrote, that you have AD248A#130 (P400), and later you wrote, that you have AD248A#106 (internal RAID).

[shikhar_1]

Its having AD248A#130 (P400) for my rx2660 server.
pls tell for that

[Zygmunt Krawczyk]

After booting the server to the EFI shell, and changing directory to
\efi\hp\tools\io_cards\smartarray
do the following

Get the controller details using
saupdate list

If the firmware version is lower than 7.22, update the firmware using
saupdate update INC722.PAK

Restart the system using
reset

[shikhar_1]

How do i get this info that is in the command?

INC722.PAK
Do i get this info by this command "saupdate list"?

[Zygmunt Krawczyk]

Info about seg:bus:dev:func values you will get from the command "saupdate list".