HPE Community
Integrity Servers
1848679 Members
7488 Online
104035 Solutions
New Discussion

Re: get password from MP (Management Processor)

 
SOLVED
Go to solution
Gregory Locke
Frequent Advisor

‎05-30-2007 06:59 AM

‎05-30-2007 06:59 AM

get password from MP (Management Processor)

The MP password of our Itanium was set up by another admin. Short of resetting the MP to its defaults, is there any other way to reset it's password directly or through a terminal session on the server itself?
0 Kudos
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎05-30-2007 07:01 AM

‎05-30-2007 07:01 AM

Solution

Re: get password from MP (Management Processor)

Hi,

see this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1131336

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Torsten.
Acclaimed Contributor

‎05-30-2007 07:44 AM

‎05-30-2007 07:44 AM

Re: get password from MP (Management Processor)

Same question:
Did you use the command or the reset button?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Gregory Locke
Frequent Advisor

‎05-31-2007 11:42 AM

‎05-31-2007 11:42 AM

Re: get password from MP (Management Processor)

thanks for the help
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.