HPE Community
Integrity Servers
1849249 Members
4490 Online
104042 Solutions
New Discussion

Re: Help required -Urgent

 
Trng
Super Advisor

‎01-11-2010 08:32 PM

‎01-11-2010 08:32 PM

Help required -Urgent

Dear All,

Customer has changed rx4640 console setting through EFI .Now no display coming on console connected to VGA Port.i am able to telnet from remote machine.How to reset the console setting in EFI ?


regards
administrator
0 Kudos
Reply
3 REPLIES 3
sujit kumar singh
Honored Contributor

‎01-11-2010 08:36 PM

‎01-11-2010 08:36 PM

Re: Help required -Urgent

hi

revert back the settings on the rx4640 to serial console.

perhpas you shall need to access the EFi shell for doing this.


regards
sujit
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎01-11-2010 10:14 PM

‎01-11-2010 10:14 PM

Re: Help required -Urgent

At EFI level you can use all connections as a console.

So go to EFI and use "conconfig".


Note: If console set to VGA, you cannot use the MP to get the hp-ux console from remote!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Steven Schweda
Honored Contributor

‎01-12-2010 02:43 AM

‎01-12-2010 02:43 AM

Re: Help required -Urgent

> Subject: Help required -Urgent

A Subject which contains a short description
of the subject often works better than one
which says nothing useful.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.