HP Integrity rx2660 Dual Processor Server

[shadi_ss]

Hello,
I have 4 HP Integrity rx2660 Dual Processor Server, I would like to install
Microsoft Windows Server 2008 R2 for Itanium-Based Systems in all 4 servers, I have been downloaded the correct smartSetup depend on OS. But I need to redirection the boot to the smart setup by using EFI Boot manger.
Could you please share it to me or send the download link

thank you
best regards

[Torsten. · Accepted solution]

From EFI shell do a "map -r" and look for USB entries, e.g.

Shell> map -r
Device mapping table
fs0 : Acpi(HWP0002,PNP0A03,0)/Pci(2|1)/Usb(0, 0)/CDROM(Entry0)


then switch to fs0: and run the installer.

[shadi_ss]

Thank you , server is up now , it's working fine. but i have question:
why when it goes to restart ,i lost the driver of graphic card and i have to install it again!!

[shadi_ss]

Hello,
Any one has the EFI boot manger which came with integrity server , can uploaded to any server.
I am not familiar with Integrity server , i need it very badly.

thanks

[Torsten.]

The boot manager is built into firmware and always there. You should see it during boot.

[shadi_ss]

When I startup the server, only I got the prompt in black screen , I know there is something wrong

[Torsten.]

The boot menu should appear on both possible consoles, serial (MP) and VGA.

Which one you are using?

[shadi_ss]

It is Ok , i have been used the serial console , all servers are working fine

i have been updated the Firmware and O.S update patches.
Only i have one problem when i restarted the servers , server are lost the driver of graphic card , bad resuscitation, i have been downloaded the latest driver for video card but still i have the same problem , is there any compatibility issue with Microsoft 2008 r2