MP Console on rx 8640

[Sakui]

I have a rx 8640 with two cell board installed. I connected to MP console to configured an ip address for the MP LAN. After configuring the Ip address , subnet mask and default gateway. I can't ping or connect to the MP LAN through telnet or web browser. Is there any security issue on this series of intergrity servers.When i do ls command , i can see all the setting i configured on that interface.
The cables are all fine and blinking green lights

[Mridul Shrivastava]

Insure that machine is on the same network ie have the same subnet mask as of MP LAN?

If its on different network then there would be issue.

[Jeeshan]

Hi

check the ip address and subnet mask u have used.

and also if your subnet , where u access from and the MP subnet is same or if not same, routing must be there.

[YAQUB_1]

Hi Sakui,

check the below URL site:-
http://docs.hp.com/en/AB464 9003C/ch03s07.html

Hope it will help for U.

Thanks--Yaqub
I am a Customer Advocate!!!

[YAQUB_1]

Sorry,

http://docs.hp.com/en/AB464-9003C/ch03s07.html

Now, U access above link.....