HPE Community
Integrity Servers
1848673 Members
7251 Online
104035 Solutions
New Discussion

Re: Multiple logical drives on MSA30

 
Larry Romo
New Member

‎04-14-2009 08:34 AM

‎04-14-2009 08:34 AM

Multiple logical drives on MSA30

I have an MSA30 through a 6402 controller in HPUX 11.23. Currently I have 7 drives (6 plus a spare) in ADG RAID level in logical drive 0. I want to add 4 new 300GB drives in a new Logical Drive 1 to this so it is 2 separate logical drives on the one MSA30. I tried running ciss_insf and it wants a loadfile. I tried passing it a parameter like /dev/ciss5 to tell it to create a new special device file. It did not like that. I have looked at man saconfig and do not see any way to create a second logical drive on that box. Add to an existing logical drive, or remove from it but not creating a second logical drive. Any hints what commands for that?
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-14-2009 10:00 AM

‎04-14-2009 10:00 AM

Re: Multiple logical drives on MSA30

First of all you need a current driver version, please check

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A9890A

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.