rx2600 MP cable

[Torsten.]

I'm sure you are still in ADMIN mode,

Shell> sysmode service

[Timothy P. Jackson]

That did the trick... Here is what I get from the sysset command.

Shell> sysmode service
Current System Mode: ADMIN

You are now in SERVICE mode.

Shell> sysset
System Information:
Manufacturer: hp
Product Name: server rx2600
Product Number: A6873A
Secondary Product Number is Identical
Serial number: US30163232
Secondary Serial Number is Identical
UUID: E5E800D0-3AEF-11D7-B017-8345935B12FD (Valid)
Secondary UUID is Identical
Product ID: 0x103

Shell>

Tim

[Torsten.]

All settings are ok ...

[Timothy P. Jackson]

Hi Torsten,

I think i made some progress. I did a "default" command from the EFI Shell. Then I when back into the console output device, console input device and starndard error device, and reconfigured them. After this I did a "cold reset" and the settings seemed to stay the way I set them!

Unfortunately it also removed my boot device, so I figured I would just reinstall the OS.

I am now able to Install using the console on the MP!!!!

Thanks Torsten for sticking with me to get this resolved!


Thanks again!
Tim

[Torsten.]

Restoring the boot path is not a problem.

You can locate the boot loader from efi and boot, once booted use "setboot" command from hp-ux to set primary and alternate path entry in boot menu.

However, strange thing ...

[Timothy P. Jackson]

Sorry for the late response Torsten!!!

I have the rx2600 up and running, now it is off to the next problem.

Thanks again for all your help!

Tim

[Timothy P. Jackson]

see above thread