HPE Community
Integrity Servers
1849251 Members
4987 Online
104042 Solutions
New Discussion

Re: rx3600

 
Jamal Willis
New Member

‎04-02-2009 07:27 AM

‎04-02-2009 07:27 AM

rx3600

I have a machine with AH237A that works fine but when i install AD390A's,it will not boot up.When the AD390A are installed the server recognizes it on the low end but it will not do a selftest or boot.Can someone please help me?
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎04-02-2009 07:34 AM

‎04-02-2009 07:34 AM

Re: rx3600

This came with a newer firmware:

Enhancements:
- Added support for the following Intel (R) Itanium (R) processors:
- HP Integrity rx3600 Server:
- AD390A Dual-core 1.42GHz processor with 12MB cache
- AD391A Dual-core 1.67GHz processor with 18MB cache

...


What firmware do you have? Run

MP:CM> sysrev

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Jamal Willis
New Member

‎04-02-2009 09:59 AM

‎04-02-2009 09:59 AM

Re: rx3600

BMC-05.21
EFI-05.37
SYSTEM -01.32
PDH-00.0D
DHPC-1.23
MP-F.02.17


Thanks
0 Kudos
Reply
cnb
Honored Contributor

‎04-02-2009 11:36 AM

‎04-02-2009 11:36 AM

Re: rx3600

Torsten's right. Your Firmware is wayyyy too low. See this link and take a look at the release notes:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3257031&swItem=ux-61650-1&prodNameId=3257032&swEnvOID=54&swLang=13&taskId=135&mode=5

hth,
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.