rx4640 memory error

[Laszlo_Pap_hu]

Hi,

we have the following error logs in our rx4640 GSP :

Log Entry 514: 08 May 2023 03:00:26
Alert Level 2: Informational
Keyword: MEM_CORR_ERR
Correctable (single-bit) ECC error in DIMM
Logged by: System Firmware 0
Data: Location - Memory (SIMM or DIMM): DIMM Slot 0xC, Extender 0
0x448000A700E03020 FFFFFFFF000CFF74

Log Entry 513: 08 May 2023 03:00:26
Alert Level 2: Informational
Keyword: Type-02 0c7000 815104
ECC error corrected in memory module
Logged by: Redundant w/ an E0 code;
Sensor: Memory
Data2: PRV State: 0x8FOEM Code2: 0x15
0xC1645865CA023010 158F6070900C0300

The slots on the memory board are numbered 0A,0B,2A,2B... and so on. Can you pls. specify which slot corresponds to 0xC slot?

Thanks in advance,

Laszlo

[jsm6]

Hi Laszlo,

Please refer below document to know which slot corresponds to DIMM slot 0C (ext 0).

https://support.hpe.com/hpesc/public/docDisplay?
docId=c01124611&docLocale=en_US#:~:text=The%20HP%20Integrity%20rx4640%20comes,%2C%200C%2C%20and%200D%5D). 

PS : The above events are for Single bit errors which are usually taken care by FW. Unless you see Multi-bit error no action required.

Hope this helps!

Thanks

[Sunitha_Mod]

Hello @Laszlo_Pap_hu, 

Let us know if you were able to resolve the issue.

If you have no further queries and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.