VCX Time Servers

[raybrindley]

Everynow and then my VCX seems to lose sync with the Time Server.



Is there anyway to restart or force the time server to resync without rebooting the system or running the network wizard?

[Telephony]

From the command line, type:



service ntpd restart



This restarts the NTP Daemon and will resynch with your timesources.

[Ed Holt]

just curious what time servers are you using?



3com recomends 1.pool.ntp.org and 2.pool.ntp.org

I had issues some time back when I was using something other than those when I switched to them I have not had an issue since.

3Com Certified IP Telephony VCX/NBX Expert

[raybrindley]

I am using internal servers at the moment, if i set them to external then it may not be the same as the internal servers. Ideally it would be the same but not necessarily... i might change them back if i continue to have problems. Is there a way to change just the NTP servers and not go through the wizard?



thanks for the service ntpd restart though that helped for the moment.

[Ed Holt]

The only way to change the ntp servers is to run

vcx-config-network and go through the wizard and then save.

3Com Certified IP Telephony VCX/NBX Expert

[raybrindley]

Thats what i thought. Thanks for the help though!